Table of Contents
Advertisement
3.1L L82 (Code M) Engine 3.4L LQ1 (Code X) Engine
3. Check both'sides of the dipstick, and read the lower
level. The fluid level must be:in the cross-hatched
area.
1. The transaxle fluid dipstick handle is the red loop
4. If the fluid level is in the acceptable range, push the
near the back of the engine. Pull out the dipstick and dipstick back in all
the way.
'wipe it with a clean rag or paper towel.
then pull it back out again.
2. Push it back in all the yay, wait three seconds and
Advertisement
Table of Contents
