Table of Contents
Advertisement
MMD85
Line In-V (Yellow)
Line In-R (Red)
Line In-L (White)
Audio Video Input
1) Make the connections to the vehicle for the 2 pin wiring harness.
2) Connect the 2 pin harness to the mating connector on the Video Monitor.
3) Connect power harness to vehicle's electrical system by tapping into an accessory hot line and a
good ground.
4) Verify all functions of the System before final mounting of the finished assembly.
Note: A VCP or other A/V Component can be connected to the video monitor system using
the LINE IN RCA jacks.
A/V Source Definitions :
1 = Built-in DVD
2 = AV1 input ( VCD, Game or future DVD, etc )
3 = AUX input ( VCD, Game or future DVD, etc )
Line Out-V (Yellow)
Line Out-R (Red)
Line Out-L (White)
To Secondary AV Monitor
Power Harness
RCA-Female
Item # 3
LINE
OUT
Patch Cord
VIDEO
RCA Male to Male
(Yellow)
Red/Black (Lamp On)
Dome Light
Violet/Brown (Lamp Auto)
Power Source
Black/Red (Lamp Common)
Audio Video Output
INPUT
12 VDC Power and Ground
VIDEO
Auxillary
video display
Line Out
Right and Left
TO
OPTIONAL
ADDITIONAL
MONITOR
Line Video Out
6
Advertisement
Table of Contents
