BIG ASS FANS K3150-A2 Installation Manual
  1. Manuals
  2. Brands
  3. BIG ASS FANS Manuals
  4. Fan
  5. K3150-A2
  6. Installation manual
BIG ASS FANS K3150-A2 Installation Manual

BIG ASS FANS K3150-A2 Installation Manual

Hide thumbs Also See for K3150-A2:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
GUIDE D'INSTALLATION
GUÍA DE INSTALACIÓN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K3150-A2 and is the answer not in the manual?

Questions and answers

Related Manuals for BIG ASS FANS K3150-A2

Summary of Contents for BIG ASS FANS K3150-A2

  • Page 1 INSTALLATION GUIDE GUIDE D’INSTALLATION GUÍA DE INSTALACIÓN...

  • Page 2: Table Of Contents

    Low Profile Mount Standard Mount Universal Mount Prepare the Fan Site Install Your Fan Airfoils Lower Cover and Trim Mounting Bracket Mounting: Low Profile Mounting: Standard Mounting: Universal Test Your Fan Models: K3150-A2, K3150-S0, K3150-X2 READ AND SAVE THESE INSTRUCTIONS...

  • Page 3: Technical Specifications

    As you remove the fan from its packaging, make sure you are not missing any components required for assembly and operation. If you ordered multiple fans, be sure to keep the components of each fan together! HAIKU ® BY BIG ASS FANS...

  • Page 4: Low Profile Mount

    Wiring hardware • Wire connectors • Wire nut • (2) Wiring cover screw † Use the two screw caps that match the color of your fan. †† Safety cable not shown. REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.

  • Page 5: Standard Mount

    (1) bolt and one (1) nut are needed. If installing the fan to a J-shaped ceiling hook, • Wire nut two (2) bolts and two (2) nuts are needed. • (2) Wiring cover screw ††† Safety cable not shown. HAIKU ® BY BIG ASS FANS...

  • Page 6: Universal Mount

    Airfoil hardware • ( 6) M5 airfoil screw • (6) 5 mm lock washer Wiring hardware • Wire connectors • Wire nut • Cable tie † Safety cable not shown. REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.

  • Page 7: Prepare The Fan Site

    Disconnect power to the fan location before wiring the fan! A readily accessible disconnect device shall be incorporated external to the equipment. HAIKU ® BY BIG ASS FANS...
  • Page 8 INSTALL THE AIRFOILS Make sure the stickers on the airfoils match the stickers on the fan hub! INSTALL AIRFOILS REMOVE PROTECTIVE COVER REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 9 Make sure the stickers on the airfoils match the stickers on the fan hub. Hardware: a. M5 airfoil screw b. 5 mm lock washer Remove and recycle the plastic protective cover (c). STEPS COMPLETED HAIKU ® BY BIG ASS FANS...

  • Page 10: Lower Cover And Trim

    If you purchased the Haiku Light Kit, proceed to the instructions included with the kit. Return to these instructions once the kit is installed. INSTALL LOWER COVER INSTALL LOWER COVER TRIM REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 11 Align the four slots on the lower cover trim with the four small round tabs on the fan hub. Press and turn the lower cover trim clockwise to lock it into place. STEPS COMPLETED HAIKU ® BY BIG ASS FANS...

  • Page 12: Mounting Bracket

    If installing your fan on a wood ceiling joist, ensure power wiring has been routed to the fan site. Attach the mounting plate or mounting bracket directly to the joist using two wood screws (not supplied). Big Ass Fans recommends using corrosion-resistant 12-11 x 45 mm hex head timber screws with seal.
  • Page 13 Outlet Box Concrete Ceiling Wood Ceiling Joist Page 14 Page 16 Page 18 HAIKU ® BY BIG ASS FANS...
  • Page 14 Standard Mount Universal Mount Installation may vary. Refer to the outlet Installation may vary. Refer to the outlet Installation may vary. Refer to the outlet box instructions. box instructions. box instructions. REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 15 Refer to the outlet box instructions. If installing a Universal Mount fan to a sloped ceiling, secure the mounting bracket so that the open side of the bracket is facing up the slope of the ceiling. HAIKU ® BY BIG ASS FANS...
  • Page 16 Install an anchor hook for the safety cable if required by your local building and safety code. Low Profile Mount Standard Mount Universal Mount Ø 6 mm Ø 12–12.5 mm 100 mm 35 mm 35 mm 45 mm 43 mm REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 17 If required by local building and safety codes, install an anchor hook (c) for the safety cable. Drill an Ø 8 mm hole for the anchor hook. The hole depth should not exceed 50 mm. Remove any dust from the hole, and then insert the anchor hook and fully tighten. HAIKU ® BY BIG ASS FANS...
  • Page 18 INSTALL THE MOUNTING BRACKET (WOOD CEILING JOIST) Low Profile Mount Standard Mount Universal Mount Not Supplied Not Supplied Not Supplied REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 19 (not supplied). If installing a Universal Mount fan to a sloped ceiling joist, secure the mounting bracket so that the open side of the bracket is facing up the slope of the joist. HAIKU ® BY BIG ASS FANS...
  • Page 20 The universal mount can be installed on sloped or flat ceilings ranging from 8.5–18 feet (2.5–5.5 meters) tall. This mount is available for fans with 52-inch (132-cm), 60-inch (152-cm), or 84-inch (213-cm) diameters. REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 21 Standard Mount Universal Mount Page 30 Page 42 HAIKU ® BY BIG ASS FANS...

  • Page 22: Mounting: Low Profile

    MOUNTING: LOW PROFILE INSTALL RUBBER BUMPERS REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 23 Slide the rubber bumpers (a) onto the extension tube brackets. STEP COMPLETED HAIKU ® BY BIG ASS FANS...
  • Page 24 MOUNTING: LOW PROFILE (CONT.) SECURE SAFETY CABLE SUPPORT FAN REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 25 (b). Allow the fan to hang from the safety cable. Concrete Ceiling Anchor Hook Secure the safety cable to an anchor hook that is properly installed in the concrete ceiling. Allow the fan to hang from the safety cable. Hardware: b. Shackle HAIKU ® BY BIG ASS FANS...
  • Page 26 MOUNTING: LOW PROFILE (CONT.) Wiring Diagram 100–240 VAC, 1 Φ, AC Hot/L1 50–60 Hz AC Neutral/L2 PE/Earth Ground BROWN BLUE GREEN/YELLOW REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 27 Test the connection by lightly tugging on the wires. PE/Earth Ground AC Hot/L1 AC Neutral/L2 (connected to fan chassis) Brown Blue Green with Yellow Tracer Australia Brown or Red Black or Light Blue Green with Yellow Tracer All other regions Brown Blue HAIKU ® BY BIG ASS FANS...
  • Page 28 MOUNTING: LOW PROFILE (CONT.) INSTALL WIRING COVER AND TRIM INSTALL MOUNTING BRACKETS REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 29 Slide the trim (f) up the extension tube, aligning the tabs on the inside with the slots on the bottom of the wiring cover. Twist clockwise to snap the trim into position. INSTALLATION COMPLETED HAIKU ® BY BIG ASS FANS...

  • Page 30: Mounting: Standard

    MOUNTING: STANDARD POSITION WIRING COVER AND TRIM REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 31 With the fan in the upright position, remove the protective covering from the extension tube. Slide the wiring cover (a) and wiring cover trim (b) over the extension tube, resting them on the fan hub. STEP COMPLETED HAIKU ® BY BIG ASS FANS...
  • Page 32 MOUNTING: STANDARD (CONT.) SECURE MOUNT BRACE BRACKETS Outlet Box or Wood Joist J-Shaped Ceiling Hook U-Shaped Ceiling Hook REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 33 (b). Loosely install the mount brace brackets (c) with the provided hardware. One bolt should be inserted in the middle hole. Do not fully tighten the hardware. Hardware: d. M6 x 1 x 25 mm socket cap screw e. M6 x 1 nylock nut HAIKU ® BY BIG ASS FANS...
  • Page 34 MOUNTING: STANDARD (CONT.) HANG FAN Outlet Box or Wood Joist Concrete Ceiling REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 35 Fully tighten all hardware so that the brackets are slightly bent. Hardware: b. M8 bolt c. 8 mm flat washer d. 8 mm lock washer e. M8 nut f. 2 mm x 2 mm split pin HAIKU ® BY BIG ASS FANS...
  • Page 36 MOUNTING: STANDARD (CONT.) SECURE SAFETY CABLE Outlet Box or Wood Joist J-Shaped Ceiling Hook or U-Shaped Ceiling Hook Hanger Plate REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 37 (a). U-Shaped Ceiling Hook Loop the safety cable around the ceiling hook, and then secure it with the shackle (a). Hardware: a. Shackle HAIKU ® BY BIG ASS FANS...
  • Page 38 MOUNTING: STANDARD (CONT.) Wiring Diagram 100–240 VAC, 1 Φ, AC Hot/L1 50–60 Hz AC Neutral/L2 PE/Earth Ground BROWN BLUE GREEN/YELLOW REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 39 PE/Earth Ground AC Hot/L1 AC Neutral/L2 (connected to fan chassis) Brown Blue Green with Yellow Tracer Australia Brown or Red Black or Light Blue Green with Yellow Tracer All other regions Brown Blue HAIKU ® BY BIG ASS FANS...
  • Page 40 MOUNTING: STANDARD (CONT.) INSTALL WIRING COVER INSTALL WIRING COVER TRIM REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 41 Slide the wiring cover trim (c) up the extension tube, aligning the tabs on the inside with the slots on the bottom of the wiring cover. Twist clockwise to snap into position. INSTALLATION COMPLETED HAIKU ® BY BIG ASS FANS...

  • Page 42: Mounting: Universal

    MOUNTING: UNIVERSAL ATTACH EXTENSION TUBE AND WIRING HARNESS M6 Nut M6 x 32 mm Bolt Wiring Harness REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 43 Align the holes on the extension tube with the holes on the motor bracket, and then secure the tube with the M6 x 32 mm bolt and M6 nut. Connect the wiring harness from the extension tube to the receptacle from the motor hub. HAIKU ® BY BIG ASS FANS...
  • Page 44 MOUNTING: UNIVERSAL (CONT.) INSTALL LOWER SAFETY CABLE AND GROUND WIRE Ground Wire (Green) Safety Cable Canopy Wiring Cover Lock Washer Screw REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 45 Slide the wiring cover down the extension tube, resting it on the fan hub. Make sure no wires are visible between the cover and fan hub. Slide the canopy down the extension tube. STEPS COMPLETED HAIKU ® BY BIG ASS FANS...
  • Page 46 MOUNTING: UNIVERSAL (CONT.) POSITION MOUNTING BALL INSTALL STEEL PIN INSTALL WEDGE REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 47 Insert the wedge (d) into the mounting ball and secure it with the screw (e). Tighten the screw enough to prevent movement between the mounting ball and extension tube, but do not overtighten. STEPS COMPLETED HAIKU ® BY BIG ASS FANS...
  • Page 48 MOUNTING: UNIVERSAL (CONT.) Wiring Diagram 100–240 VAC, 1 Φ, AC Hot/L1 50–60 Hz AC Neutral/L2 PE/Earth Ground BLUE BROWN GREEN/YELLOW GREEN/YELLOW REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 49 PE/Earth Ground AC Hot/L1 AC Neutral/L2 (connected to fan chassis) Brown Blue Green with Yellow Tracer Australia Brown or Red Black or Light Blue Green with Yellow Tracer All other regions Brown Blue HAIKU ® BY BIG ASS FANS...
  • Page 50 MOUNTING: UNIVERSAL (CONT.) HANG FAN CONNECT WIRING HARNESS REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 51 Connect the wiring harnesses. Secure the green ground wire from the extension tube to the supply ground wire and the green ground wire on the mounting bracket. STEPS COMPLETED HAIKU ® BY BIG ASS FANS...
  • Page 52 MOUNTING: UNIVERSAL (CONT.) SECURE SAFETY CABLE INSTALL CANOPY Anchor Hook REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 53 Raise the canopy to the mounting bracket, lining up the four holes on the canopy with the holes on the bracket. Secure the canopy to the mounting bracket with the painted screws. Make sure no wires or the safety cable are showing. Hardware: b. M4 x 6 mm painted screws INSTALLATION COMPLETED HAIKU ® BY BIG ASS FANS...

  • Page 54: Test Your Fan

    Adjust fan speed Adjust light using the remote. Turn on the fan and test speed and light brightness. For operation, maintenance, and troubleshooting Whoosh Timer ® information, visit bigassfans.com/support Sleep Clear REV. F © 2015 BIG ASS FANS. ALL RIGHTS RESERVED.
  • Page 55 +52 1 899 925 6398 © 2018 Big Ass Fans The information contained in this document is subject to change without notice. May be protected by one or more patents listed at www.bigassfans.com/patents Haiku is a trademark of Delta T LLC, registered in the U.S. and/or other countries.
  • Page 56 HKU-INST-99-ENG-01...

This manual is also suitable for:

K3150-s0K3150-x2

Table of Contents