5.6 Change managed AP settings
Configure AP settings in AP List, go to: Access Points >> List.
All of the APs under the management of AMG-2100/AMG-2101 will be shown in the list. The AP can be
edited by clicking the hyperlink of AP Name and the AP status can be got by clicking the hyperlink of
Status.
AP Name
Click AP Name and enter the interface about related settings. There are four kinds of settings,
General Settings, LAN Interface Setting and Wireless Interface Setting. Click the hyperlink
to go on the configuration.
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
78
User's Manual