Table of Contents
Advertisement
3) Using DHCP: If you want to use DHCP,
click on the IP Address tab and choose
"Obtain an IP address automatically",
and then click OK. This is also the default
setting of Windows. Then, reboot the PC to
make sure an IP address is obtained from
AMG-2100/AMG-2101.
4) Using Specific IP Address: If you want to use a specific IP address, acquire the following
information from the network administrator: the IP Address, Subnet Mask and DNS Server
address provided by your ISP and the Gateway address of AMG-2100/AMG-2101.
Caution:
If your PC has been set up completely, please inform the network administrator before proceeding to
the following steps.
4.1) Click on the IP Address tab and choose "Specify an IP address". Enter the IP Address,
Subnet Mask and then click OK.
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
200
User's Manual
Advertisement
Table of Contents
