Table of Contents
Advertisement
2) Right click on the Local Area Connection
icon and select "Properties".
3) Select "Internet Protocol (TCP/IP)" and
then click Properties. Now, you can choose
to use DHCP or a specific IP address.
4) Using DHCP: If you want to use DHCP,
choose
"Obtain
automatically", and then click OK. This is
also the default setting of Windows. Then,
reboot the PC to make sure an IP address is
obtained from AMG-2100/AMG-2101.
AMG-2100
AMG-2101
Gigabit Access and AP Management Gateway Plus
an
IP
address
202
Gigabit Access and AP Management Gateway/
User's Manual
Advertisement
Table of Contents
