Table of Contents
Advertisement
5) Using Specific IP Address: If you want to use a specific IP address, acquire the following
information from the network administrator: the IP Address, Subnet Mask and DNS Server
address provided by your ISP and the Gateway address of AMG-2100/AMG-2101.
If your PC has been set up completely, please inform the network administrator before
proceeding to the following steps.
5.1) Choose
"Use
address" and enter the IP address,
Subnet mask. If the DNS Server field is
empty, select "Using the following
DNS server addresses" and enter the
DNS Server address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.
5.3) Click on the IP Settings tab and click
Add below the "Default gateways"
column
and
Address window will appear.
AMG-2100
AMG-2101
the
following
the
TCP/IP
Gateway
Gigabit Access and AP Management Gateway/
Gigabit Access and AP Management Gateway Plus
IP
203
User's Manual
Advertisement
Table of Contents
