Table of Contents
Advertisement
5.1) Choose "Use the following IP address"
and enter the IP address, Subnet mask. If
the DNS Server field is empty, select
"Using
the
following
addresses" and enter the DNS Server
address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.
5.3) Click on the IP Settings tab and click Add
below the "Default gateways" column
and
the
TCP/IP
window will appear.
5.4) Enter the gateway address of
AMG-2100/AMG-2101 in the "Gateway"
field, and then click Add. After back to the
IP Settings tab, click OK to finish the
configuration.
AMG-2100
AMG-2101
Gigabit Access and AP Management Gateway Plus
DNS
server
Gateway
Address
206
Gigabit Access and AP Management Gateway/
User's Manual
Advertisement
Table of Contents
