Table of Contents
Advertisement
TCP/IP Network Setup
If the operating system of the PC in use is Windows 95/98/ME/2000/XP, keep the default settings
without any changes to directly start/restart the system. With the factory default settings, during
the process of starting the system, AMG-2100/AMG-2101 with DHCP function will automatically
assign an appropriate IP address and related information for each PC. If the Windows operating
system is not a server version, the default settings of the TCP/IP will regard the PC as a DHCP client,
and this function is called "Obtain an IP address automatically".
If checking the TCP/IP setup or using the static IP in the LAN1/LAN2 or LAN3/LAN4 section is desired,
please follow these steps:
Check the TCP/IP Setup of Window
9x/ME
1) Choose Start >> Control Panel >>
Network.
2) Click on the Configuration tab and select
"TCP/IP
>>
Ethernet Adapter (PCI-ISA)", and then
click Properties. Now, you can choose to
use DHCP or a specific IP address.
AMG-2100
AMG-2101
AMD
PCNET
Family
Gigabit Access and AP Management Gateway/
Gigabit Access and AP Management Gateway Plus
199
User's Manual
Advertisement
Table of Contents
