Connecting The Unit; Connection Conditions; When Using A 1-Channel Receiver Side Unit - Panasonic WJ-PR204 Operating Instructions Manual

4 Connecting the Unit

4 Connecting the Unit

4.1 Connection Conditions

Maximum cable length varies depending on the power source used for the receiver side
unit and the camera. Refer to the following information when connecting a camera to
the coaxial LAN converter.

4.1.1 When using a 1-channel Receiver Side Unit

IMPORTANT
Use RG-6/U coaxial cable with a loop resistance of 4 /100 m {328 feet} or less.
•
• When the receiver side unit is powered by PoE, use a PoE camera that consumes
no more than 6.5 W. A PoE+ camera cannot be connected.
Receiver
side unit
power
source
AC adaptor
PoE
30 Operating Instructions
Camera
Camera side unit
power Ethernet
source cable length
PoE+ Max. 50 m
{164 feet}
PoE Max. 100 m
{328 feet}
External Max. 100 m
power supply {328 feet}
PoE+ Cannot be
connected
PoE Max. 100 m
*2
{328 feet}
External Max. 100 m
power supply {328 feet}
Receiver
side unit
Ethernet
cable length
Max. 100 m
{328 feet}
Max. 100 m
{328 feet}
Max. 100 m
{328 feet}
*3
Cannot be
connected
Max. 5 m
{16 feet
4-27/32 inch
es}
Max. 5 m
{16 feet
*3
4-27/32 inch
es}
Compatible coaxial cable
length
Max. 200 m {656 feet}:
PoE+ camera
Max. 300 m {984 feet}:
Cameras recommended by
Panasonic
*1
Max. 300 m {984 feet}: PoE
camera
Max. 500 m {1,640 feet}:
Cameras recommended by
Panasonic
*1
Max. 2.0 km {6,560 feet}
Cannot be connected
Max. 300 m {984 feet}: PoE
camera
Max. 500 m {1,640 feet}:
Cameras recommended by
Panasonic
*1
Max. 2.0 km {6,560 feet}