Mounting The Unit; Mounting The Camera Side Unit - Panasonic WJ-PR204 Operating Instructions Manual

3 Mounting the Unit

3.1 Mounting the camera side unit

Please read the following information before mounting the camera side unit.
IMPORTANT
• Mount the camera side unit to a secure location that is firm enough to support its
weight (approximately 110 g (0.24 lb)) and the weight of the cabling.
• Mount the camera side unit to secure part of the ceiling or wall such as a
crossbeam.
• Do not mount camera side units above or below other camera side units. This
can cause transmission interference. When mounting several camera side units
in the same area, mount them side by side each other.
• The pull-out strength of the installation area must be at least 294 N (66.1 lbf) per
screw.
1. Mount the camera side unit on a durable part of a ceiling or wall using wood screws
(420 mm {13/16 inches} nominal diameter) (accessory).
• Use the included wood screws to mount the unit onto a wooden ceiling or wall
only. If the ceiling or wall is not wooden, use screws (locally procured) appropriate
for the ceiling or wall materials.
Wood screw
(4×20 mm {13/16 inches})
nominal diameter
3 Mounting the Unit
89 mm
{3-1/2 inches}
Operating Instructions 25