Gateway M275 User Manual page 92

Chapter 6: Upgrading Your Convertible Tablet PC
10
Pull the memory module out of the slot.
11
Hold the new or replacement module at a 30-degree angle and press
it into the empty memory slot. This module is keyed so it can only
be inserted in one direction. If the module does not fit, make sure
that the notch in the module lines up with the tab in the memory
bay.
Important
12
Gently push the module down until it clicks in place.
13
Replace the memory bay cover and tighten the cover screws.
14
Insert the batteries, then turn your convertible tablet PC over.
15
Reattach the optional port replicator.
16
Connect the power adapter, modem cable, and network cable, then
turn on your convertible tablet PC.
86
Use only memory modules designed for the
Gateway M275.
www.gateway.com