MakerBot Digitizer User Manual page 57

PROBLEM
You receive a "MultiScan
Failed" message.
TROUBLESHOOTING
SOLUTION
MultiScan Technology could fail to merge your
scans if:
• You attempted to combine scans of two
different objects
• Lighting conditions changed between your
first and second scans
• Your object is fuzzy, reflective, transparent,
or very dark, and produced widely different
sets of scan data for each scan.
MultiScan Technology should only be used to
combine scans of the same object, scanned
under similar conditions. If MultiScan
Technology fails to merge your scans,
MakerWare for Digitizer will revert your scan to
its previous state.
TROUBLESHOOTING + MAINTENANCE
57