Post-Scan Steps - MakerBot Digitizer User Manual

SCAN COMPLETE! NOW WHAT?
Once your scan is complete, you can
name your file and crop any unwanted
data from the top and bottom of your
mesh and add additional scans before
you save a final 3D model file.
NAME YOUR SCAN
Enter a name for your scan file in the
Name your Scan field. Your file will
be saved to your Things (on a Mac
computer) or My Things (on a Windows
computer) folder as a Thing file. If you
do not enter a name into the Name
your Scan field, the Thing file will be
saved as "My Scan at [datestamp]."
MULTISCAN
Click Start MultiScan to add additional scan data. MakerWare for Digitizer will walk you
through adding as many scans as you need to capture every part of your object. See page
42 for instructions on using MultiScan Technology.
CROP
Click Crop to go to the crop screen, where you can cut off the top or bottom of your object
or remove unwanted data above or below your object. See page 43 for instructions on using
the Crop feature.
SAVE + CONTINUE
Click Continue to save the scan to your Things or My Things folder and continue to the
next screen.
48