EMU procussion Operation Manual page 10

10
Quick Setup - MIDI Drum Pads
QUICK SETUP
Using the PROCUSSION with Drum Pads
These instructions will get you up and running in the shortest amount of
time. Connect Procussion to your sound system and MIDI drum pads as
shown on the facing page (or on page 7) and turn everything on.
1) Play your MIDI drum pads and verify that the MIDI light on
Procussion flashes as the pads are played. If not, check the MIDI
connection.
2) Set Procussion to Kit 000, "Ampitheater" (or any of the kits marked
with an asterisk in the kit listing).
3) Assign each pad of your MIDI drum pad controller to a MIDI note
number using the Standard Factory Kit Layout on page 91. Set the
MIDI pads up however you like, but be sure to save your layout to the
pad controller when you have finished.
4) Turn the data knob on Procussion clockwise to select another kit. Since
you used one of the Standard Kits as your model, most other
Procussion factory kits (marked *) will follow the same pad layout.
MIDI Key #
33 35 36 38 40 41 43 45 47 48 50 52 53 55 57 59 60 62 64 65 67 69 71 72 74 76 77 79 81 83 84 86 88 89 91 93 95 96 98
Use the Standard Factory Kit Layout to assign your Drum Pads so that most of the
Procussion Factory Kits will match up with your pad assignments.
Your MIDI Controller
assigns each
Pad a MIDI Number
Note #51 Note #50
drumKAT
Cymbal Cymbal
Note #49
Cymbal
Note #43 Note #45
Tom Tom Tom Tom
Note #52
Note #38 Note #39
Hi Hat
Main Snare Aux. Snare
Standard Factory Kit Layout
Procussion operation manual
Note #46
Perc.
Note #47
Tom Tom