Audio Board - HP Pavilion x2 Detachable Maintenance And Service Manual

Audio board

Description
Audio jack board (includes cable and double-sided adhesive)
Before removing the audio jack board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Disconnect the battery cable from the system board (see
Remove the audio jack board:
1. Release the ZIF connector (1) to which the audio jack board cable is attached, and then disconnect the
audio jack board cable from the system board.
2. Detach the audio jack board cable (2) from the display panel assembly. (The audio jack board cable is
attached to the display panel assembly with double-sided adhesive.)
3. Remove the two screws (3) that secure the audio jack board to the display panel assembly.
4. Remove the audio jack board (4) and cable.
Reverse this procedure to install the audio board and cable.
30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Back cover on page 26).
Spare part number
814721-001
832765-001
Battery on page 28).