Monitor Out - BenQ MH741 User Manual

FUNCTION
Baud Rate
Test Pattern
Closed
Caption
Standby
Settings
Reset All
Settings
54 Operation
DESCRIPTION
Selects a baud rate that is identical with your computer's so that you
can connect the projector using a suitable RS-232 cable and update
or download the projector's firmware. This function is intended for
qualified service personnel.
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Microphone
Selecting On enables the function, and the microphone can be used
even in standby mode.

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the PC jack is correctly
connected to devices. See
the connection.
Audio Pass Through
Press ◄/► to choose the source that you wish to use in operation
mode. See "Connection" on page 21
When the corresponding jacks are correctly connected to the
device, the projector can output an audio signal to the external
speaker when it is in standby mode. The built-in speaker(s) will be
muted in standby mode.
Enabling this function slightly increases the standby power
consumption.
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
Projector Installation, Language, High Altitude Mode, Security
Settings, Baud Rate.
"Connection" on page 21
for how to make the connection.
for how to make