Remote Control; Network Setting - BenQ MH741 User Manual

Remote Control

1
2
3
4
5
6
7
8
9
10
11
12
13
1. ON /
Toggles the projector between standby
mode and on.
2. Source selection buttons
Selects an input source for display.
3. Keystone/Arrow keys (
/▼ Down)
Manually corrects distorted images
resulting from an angled projection.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD
menu, exits and saves menu settings.
5. ◄ Left/
Decreases the projector volume.
6. ECO BLANK
Used to hide the screen picture.
12 Introduction
14
15
16
17
18
3
19
20
21
22
23
OFF
/▲ Up,
7. LASER
Emits visible laser pointer light for
presentation purposes.
8. MHL control buttons
Goes to the previous file/Plays/Pauses/
Goes to the next file/Rewinds/Stops/
Fastforwards during media playback.
Only available when controlling your
smart device in MHL mode.
9. ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size.
10. ASPECT
Selects the display aspect ratio.
11. FREEZE
Freezes the projected image.

12. NETWORK SETTING

Displays the Network Settings OSD
menu.
13. Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be
pressed when asked to enter password.
14. NETWORK
Selects Network Display as the input
signal source.
15. AUTO
Automatically determines the best
picture timings for the displayed image.
When there is no OSD menu and at
MHL source, long press for 3 seconds to
switch between MHL mode and DLP
mode on remote control for MHL keys.