BenQ MH741 User Manual page 14

(Available in Japan region)
1
2
3
4
5
6
7
8
9
10
11
1. ON /
Toggles the projector between standby
mode and on.
2. Source selection buttons
Selects an input source for display.
3. Keystone/Arrow keys (
/▼ Down)
Manually corrects distorted images
resulting from an angled projection.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD
menu, exits and saves menu settings.
5. ◄ Left/
Decreases the projector volume.
6. ECO BLANK
Used to hide the screen picture.
14 Introduction
12
13
14
15
16
3
17
18
19
20
TEST
21
OFF
/▲ Up,
7. ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size.
8. ASPECT
Selects the display aspect ratio.
9. FREEZE
Freezes the projected image.
10. NETWORK SETTING
Displays the Network Settings OSD
menu.
11. Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be
pressed when asked to enter password.
12. NETWORK
Selects Network Display as the input
signal source.
13. AUTO
Automatically determines the best
picture timings for the displayed image.
When there is no OSD menu and at
MHL source, long press for 3 seconds to
switch between MHL mode and DLP
mode on remote control for MHL keys.
14. ► Right/
Increases the projector volume.
When the On-Screen Display (OSD)
menu is activated, the #3, #5, and #14
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
When MHL function, the #3, #5 and
#14 are used as directional arrows. #4
for MENU/EXIT and #15 for MODE/
ENTER.
15. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen
Display (OSD) menu item.
16. SOURCE
Displays the source selection bar.
17. PAGE +/PAGE -
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).