Direct Power On; Sleep Timer - BenQ MH741 User Manual

FUNCTION
Presentation
Timer
Language
Projector
Installation
Menu Setting
Operation
Setting
52 Operation
DESCRIPTION
Reminds the presenter to finish the presentation within a certain
time frame. See "Setting the presentation timer" on page 39
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 28
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
details.
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Selecting On allows the projector to remind you to clean the filter.

Direct Power On

Powers projector on automatically when the power cable is
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
page 58 for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On
enables the function and the projector cooling time will be shortened
from a normal 90 second duration to approximately 2 seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
on page 40 for details.

Sleep Timer

Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
for details.
"Choosing a location" on page 18
"Setting Auto Power Off" on
for details.
for
"Hiding the image"