Monitor Out - BenQ MX602 User Manual

Function
Closed
Caption
Standby
Settings
Reset All
Settings
44 Operation
Downloaded from ProjectorsManual.com Manuals
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
Press / to choose the source that you wish to use in operation
mode. See "Connection" on page 16
When the corresponding jacks are correctly connected to the device,
the projector can output an audio signal to the external speaker when
it is in standby mode. The built-in speaker(s) will be muted in standby
mode.
Enabling this function slightly increases the standby power consumption.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, User 1, User 2,
Reference Mode, 3D Color Management, Reset Picture Settings,
Projector Installation, Language, High Altitude Mode, Security
Settings, Baud Rate, Reset All Settings and Current System Status.
Description
"Connection" on page 16
for how to make the connection.
for how