Setting The Presentation Timer - BenQ MH741 User Manual

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Go to the System Setup: Basic > Presentation Timer menu and press MODE/
ENTER to display the Presentation Timer page.
2. Highlight Timer Period and decide the time period by pressing ◄/►. The length of
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in
5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press ▼ to highlight Timer Display and choose if you want the timer to show up
on the screen by pressing ◄/►.
Selection
Always
3 min/2 min/1 min Displays the timer on screen in the last 3/2/1 minute(s).
Never
4. Press ▼ to highlight Timer Position and set the timer position by pressing ◄/►.
5. Press ▼ to highlight Timer Counting Direction and select your desired counting
direction by pressing ◄/►.
Selection
Count Up
Count Down
6. Press ▼ to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing ◄/►. If you select On, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press ▼ and press ◄/► to highlight On and
press MODE/ENTER.
8. A confirmation message appears. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message "Timer is On"
appearing on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1. Go to the System Setup: Basic > Presentation Timer menu and highlight Off.
Press MODE/ENTER. A confirmation message appears.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message
"Timer is Off" appearing on the screen.
Operation
Description
Displays the timer on screen throughout the presentation time.
Hides the timer throughout the presentation time.
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
39