BenQ MH741 User Manual page 38

2. Press MODE/ENTER and the 3D Color Management page displays.
3. Highlight Primary color and press ◄/► to select a color from among Red, Green,
Blue, Cyan, Magenta and Yellow.
4. Press ▼ to highlight Hue and press ◄/► to select its range. Increase in the range
will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for
how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
5. Press ▼ to highlight Saturation and adjust
its values to your preference by pressing ◄/
►. Every adjustment made will reflect to the
image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of "0" removes that color from the image entirely. If the saturation is too high,
that color will be overpowering and unrealistic.
6. Press ▼ to highlight Gain and adjust its values to your preference by pressing ◄/►.
The contrast level of the primary color you select will be affected. Every adjustment
made will reflect to the image immediately.
7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit and save the settings.
Resetting current or all picture modes
1. Go to the Picture menu and highlight Reset Picture Settings.
2. Press MODE/ENTER and press ▲/▼ to select Current or All.
• Current: returns current picture mode to the factory preset settings.
• All: returns all settings, except User 1/User 2 in the Picture menu to the
factory preset settings.
38 Operation
Yellow
RED
Cyan
Magenta
BLUE
GREEN