Rear Wheel Disassembly And Replacement - Regal Raptor DAYTONA 125 User Manual

REAR WHEEL DISASSEMBLY AND REPLACEMENT

Use a jack to raise the motorcycle's rear wheel off the ground. Unscrew the rear brake adjusting
nut . Disassemblly the rear master cylinder
and remove the rear axle nut
remove the driving chain from the drive gear, thus taking out the rear wheel.
Rear master cylinder
Rear master cylinder nut
Rear axle nut
Rear wheel axle
Front/rear wheel axle nut torch:40-50N.m, Apply the brakes for several times after adjusting the rear
brake and the chain and installing the front and rear wheels, and then release both front and rear brakes
to check that the wheels rotate properly.
35
hitch the other side of rear wheel axle with wrench,
.and take out the rear wheel axle .Move the rear wheel forward and