Maintenance Schedule - Regal Raptor DAYTONA 125 User Manual

REMOVAL FROM STORAGE
1.Uncover and clean the motorcycle.
2.Check the accumulator voltage. When the voltage is 12.3V below, slowly charge
ulator as required Install the accumulator,
3.Drain any rust-inhibiting oil from the fuel tank. Fill the fuel tank with fresh Petrol.
4.Perform all pre-ride inspection checks. Test ride the motorcycle in a safe area
Check that the motorcycle functions properly.
MAINTENANCE
Clean the motorcycle off dust and mud with dry cloth regularly. Dry the motorcycle when it is wet.
Apply a little rust-inhibiting oil on zinc-coated and chrome-coated parts. Wax the painted parts to keep
them bright and elegant. Lubricate every moving Part.
In flate both front and each tyres properly. Measure the pressure with a gauge and make it in accordance
with the specified requirements.
Che ck for bolts, nuts and screws to prevent a safety hazard resulting from loosening or falling-off of parts.
Check for both front and rear brakes. Immediately adjust and replace if they are excessively worn or
don't function properly.

MAINTENANCE SCHEDULE

Perform the pre-ride inspection at each scheduled maintenance period. Symbols in the table stand for as
follows:
1.INSPECT, CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY.
C:CLEAN R:REPLACE A: ADJUST L:LUBRICATE I:INSPECT
* Should be serviced by your authorized service dealer unless the owner has proper tools and parts or is
mechanically qualified.
** I n the interest of safe ty, we recommend these items be serviced only by your authorized service dealer.
41
the accum-
from traffic.