Regal Raptor DAYTONA 125 User Manual page 15

[Electric Starter Button]
The starter button is one of the right handlebar controls
1.Make sure that the gear is shifted to neutral and the fuel switch is in the position of "
the clutch lever to separate the clutch when the motorcycle remains in any other gear.
2.Open the cover of the ignition switch lock, insert the key into switch and turn it 90 degree anti-
clockwise, remove the key and close the lock cover, move the ignition switch 30 degree anticlockwise
to the internal gear position.
3.Turn the engine cut-off switch to "
slightly opening the throttle can crank the engine.
[Headlight Switch]
The head light switch has three positions "
" ":headlight, taillight, metre lights and license plate light on.
" ":front position light, taillight, license plate light on.
" ":headlight, taillight, front position light, license plate light off.
[Engine Cut-off Switch]
Engine Cut-off is one of the right handlebar controls.
¡Á
" ":meaning that the whole circuit is cut off, the engine can' be cranked or to stop the running engine.
" ":meaning that the whole circuit is switching-in,the engine can be cranked. To start the engine,
the engine cut-off switch must be turned to "
13
" and press the electric starter button "
", " " and "
".
",or grasp
",at the same time,
".