Fuse Replacement - Regal Raptor DAYTONA 125 User Manual

Table of Contents

Advertisement

FUSE REPLACEMENT

Remove the right guard board by loosening the hexangular bolt on the main seat and open the
fuse box (white) to replace the fuse. There are 2 spare fuses for your motorcycle. Reinstall the guard
board in reverse order of the removal and fix it after replacement. The specified fuses are 15A.
When frequent fuse failure occurs. It usually indicates a short circuit or an overload in the
electrical system. See your authorized service dealer for repair.
Caution:
Replace with the specified fuse. Never use other conductive materials for replacement. Turn the
ignition switch off before checking or replacing fuses to prevent accidental short-circuiting. To
replace the fuse in the fuse box, remove the fuse box cover. Pull the old fuse out of clips. Push a new
fuse into the clips and install the fuse box cover.
39
Fusion

Advertisement

Table of Contents
loading

This manual is also suitable for:

Daytona 350

Table of Contents