Cleaning; Storage Guide - Regal Raptor DAYTONA 125 User Manual

CLEANING

Clean your motorcycle regularly to protect the surface finishes and inspect it for
damage, wear and oil seepage.
CAUTION: High pressure water can damage certain parts of the motorcycle. Avoid spraying high
Pressure water at the following areas: ignition switch, handlebar switches, instruments,
muffler outlet and underseat.
Prevent water from flowing into the muffler, spark plug and Accumulator.
1.After cleaning , rinse the motorcycle thoroughly with plenty of clean water. Otherwise, these repairs may be
forgotten by the time the motorcycle is removed from.
2.Dry the motorcycle thoroughly. Start the engine and letitrun for several minutes.
3.Lubricate the driving chain.
4.Test the brakes before riding the motorcycle in traffic. Several applications may be necessary to restore
normal braking performance.
WARNING: Braking performance may be impaired immediately after washing the Motorcycle.

STORAGE GUIDE

Extended storage, such as for winter(exceeding one month), requires that you take certain steps to reduce the
effects of deterioration form non-use of the motorcycle. In addition, necessary repairs should be made BEFORE
storing the motorcycle.
Storage.
1.Clean and dry the motorcycle. Wax all painted surface.
2.Drain the fuel tank and carburetor. Spray the inside of the tank with aerosol rust-inhibiting oil.
3.Remove the spark plugs and pour a tablespoon(15-20ml)of clean engine oil into each cylinder Press. The
starter button for several times after turning off the ignition switch to diffuse the engine oil evenly in the cylinders,
and then reinstall the spark plugs.
4.Remove the accumulator. Store in a well-ventilated, dry, and cool area protected from direct sunlight.
NOTE: To remove the accumulator, dismantle the negative wire and then positive wire.
When installing, fix the positive wire first and then negative and close the ignition switch.
5.Inflate the tyres to their recommended pressures. Place the motorcycle on blocks to raise both tyres off the
ground.
6.Cover the motorcycle using cloth or other strongly air-permeable materials and store in a well-ventilated area,
free of rain and direct sunlight with a minimum of daily temperature variation.
40