Rear Wheel Disassembly And Replacement - Regal Raptor DD350E-6- DD250E-10 User Manual

REAR WHEEL DISASSEMBLY AND REPLACEMENT

Use a jack to raise the motorcycle's rear wheel
off the ground. Unscrew the rear brake adjusting
nut . hitch the other side of rear wheel axle with
wrench, and remove the rear axle nut .and take
out the rear wheel axle .Move the rear wheel
forward and remove the driving chain from the
drive gear, thus taking out the rear wheel.
Rear brake disc adjusting nut
Rear wheel axle
Front/rear wheel axle nut torch:40-50N.m, Apply the brakes for several times after adjusting the rear
brake and the chain and installing the front and rear wheels, and then release both front and rear brakes
to check that the wheels rotate properly.
35
Rear axle nut