Display Assembly, Non-Touch - HP Pavilion 17 Maintenance And Service Manual

Display assembly, non-touch

Description
Raw display panel (43.9-cm [17.3-in]; includes screw covers)
BrightView, HD, flat without a touch screen
AntiGlare, FHD, for models without a touch screen
AntiGlare, FHD+, for models without a touch screen
Antennas (include screw covers)
Display bezel
Display cable HD (includes screw covers)
Display cable FHD (includes screw covers)
Display enclosure (includes screw covers)
Sunset red models
Blizzard white models
Cobalt blue models
Natural silver models
Violet purple models
Peachy pink models
Hinges (left and right) HD (include screw covers)
Hinges (left and right) FHD (include screw covers)
Webcam/microphone module for non-touch screen
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the display assembly:
1. Position the computer upside down with the display partially open.
2. Remove the four Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
3. Open the display to rotate the hinges upward to an angle (2).
Battery on page 29).
Optical drive on page
Bottom cover on page
30).
34).
Component replacement procedures
Spare part number
809313-001
809347-001
835816-001
809271-001
809291-001
809292-001
809293-001
809274-001
809278-001
809275-001
809273-001
809277-001
809276-001
809297-001
809298-001
806758-001
59