Display Assembly, Non-Touch - HP Pavilion 17 Series Maintenance And Service Manual

Display assembly, non-touch

Component
Display bezel (includes screw covers)
Webcam/microphone module non-touch screen
Raw display panel (16:9 Ultra Wide Aspect Ratio [43.9-cm 17.3-in]; includes screw covers)
WLED Brightview HD+ non-touch screen
WLED Antiglare FHD non-touch screen
Display cable HD non-touch screen (includes screw covers)
Display cable FHD non-touch screen (includes screw covers)
Antennas non-touch screen (includes wireless antenna cables and transceivers; includes screw
covers)
Hinges HD non-touch screen (left and right, includes screw covers)
Hinges FHD non-touch screen (left and right, includes screw covers)
Display enclosure:
Cobalt blue models
Sunset red models
Blizzard white models
Natural silver models
Violet purple models
Peachy pink models
Sparkling black models non-touch screen
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the display assembly:
1. Position the computer upside down with the display partially open.
2. Remove the four Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
3. Open the display to rotate the hinges upward to an angle (2).
Battery on page 27).
Optical drive on page
Bottom cover on page
28).
32).
Component replacement procedures
Spare part number
809291-001
806758-001
809313-001
809347-001
809292-001
809293-001
809271-001
809297-001
809298-001
809275-001
809274-001
809278-001
809273-001
809277-001
809276-001
810947-001
57