Bellfires BSV 19 Installation Manual page 31

You are now ready to lay the hearth. Lay hearth piece (or pieces if two
piece) on Cera-Foil blanket, trace outline and cut out the resulting piece and
lay it on the floor of the fireplace. Place the rear refractory hearth piece
down on the Cera-Foil.
Use cardboard to
make a template
for the front
hearth piece. It is
very possible the
two outside
angles for the
flares will be dif-
ferent. It is much
easier to cut a
new cardboard
template than to
recut the refrac-
tory floor piece.
Remember:
Measure Twice–
Cut Once.
31
Bellfires® BSV