Bellfires BSV 19 Installation Manual page 30

Bellfires® BSV
Place Cera-Foil gasket on top of refractory
firebox. Lower liner and Smoke Dome onto
the firebox, making sure all space between
the Smoke Dome and firebox is filled with
gasket.
Before pouring mixture, make sure
the 1" Cera-Foil is snugged against
back of firebox. Pour mixture behind
firebox, tamping lightly inbetween
pours. Be sure the mix is at least
level with the height of the firebox.
Attach the two Smoke Dome fasteners
to the Bellfires® firebox by drilling a
hole for the Tapcon screw supplied.
Install with the Tapcon fastening sys-
tem. Tighten the stainless ratcheting
screw until snug. Do not over tighten.
30
See Catalog for:
Tapcon Fastening System
pg. 99