Bellfires BSV 19 Installation Manual page 25

See Catalog for:
4 " Sander-Grinder
pg. 90
Smoke Dome and liner wiched into
place, just a few inches above from
where it will be lowered onto the
installed Bellfires® firebox. The card-
board template can be used to check
for placement of the firebox and to be
sure the Smoke Dome can be lowered
and properly seated on the firebox.
Now you can prepare the firebox for
installation.
Carefully look over the refrac-
tory firebox and flares to
check for uneven bumps, etc.,
anything that might prevent a
smooth joint and a tight seam
between the rear firebox panel
and side flares. A grinder can
be used to sand down any
imperfections.
25
Bellfires® BSV
Winching the
preattached
Smoke Dome
and liner into
place.