Opening And Closing The Hob - Lacanche CLUNY INDUCTION Manual

It may be necessary to open the hob under the following circumstances :
- Making adjustments when changing gas type.
- Adjusting thermocouples.
- Resetting the safety thermostat.
To remove top :
1- Loosened the 2 screws (see
2. Lift the hob (figure
3- Wedge the hop open (see.
Refitting the cooking surface
When refitting the cooking surface, it is vital to tighten the fastening screws. Failure to do so can
cause distortion of the hob top.
INSTALLER'S MANUAL

OPENING AND CLOSING THE HOB

1
A
/ figure
2
).
2
B
/ figure ).
1
Cluny induction - Ft 151a - GB - Rév 05 - Modifié le : 07/10/2013
) through the ventilation strip.
A
2. Lift the table
1.Pull foward
B
2
9/31