Martin MAC 550 Profile User Manual page 21

removal. In touring or similar applications where the fixture is frequently moved, install the animation wheel
with the magnet in towards the drive mechanism for a more secure hold.
1. Disconnect the fixture from power and allow it to cool.
2. Remove the gobo module as described on page 22.
3. Stand the module on the work surface with the cooling fans to your left and the color wheel to your right.
4. Bring the animation wheel to the side of the module closest to you by turning the black belt on the right.
5. To avoid bending the animation wheel while removing, break the magnet's initial hold by prying the
wheel off with a screwdriver inserted from the back. Once you have broken the hold, you can safely
grasp the wheel by the edge and remove.
6. Orient the replacement wheel with the magnet in or out to suit your application. (See note.) Place the
wheel over the drive mechanism and align the hole in the wheel with the drive pin.
7. Reinstall the gobo module. Verify that the guide pins are correctly seated and that the module is
securely locked.
8. Replace the head cover and release the tilt lock before applying power.
Optical configuration 21