Unpacking; Initial Set-Up - Martin MAC 550 Profile User Manual

Unpacking

The MAC 550 Profile is packaged in either a cardboard box or a two-unit flight case that is specifically
designed to protect the product during shipment. The following items are included:
• OSRAM HTI 400/D3 lamp (installed)
• this user manual
• a 6.3 A fuse (installed) for use with 200 - 240 V power
• a 10 A fuse for use with 100-120 V power
• 2 clamp attachment brackets

Initial set-up

Before applying power to the fixture,
• carefully review the safety information on page 4,
• verify that the power supply is configured for the mains supply as described on page 8,
• install a cord cap on the mains lead as described on page 8, and
• unlock the tilt lock as described on page 22.
When powered up, check lamp alignment as described on page 7.
Introduction 5