Switch Between Lines; Conference Calls - AT&T 2462 User Manual

2462_00_1 ATT CIB 1/28
TELEPHONE OPERATION
AT THE BASE

Switch Between Lines

You can alternate between calls on Line 1 and Line 2 as often as necessary.
1
Make or answer a call.
2
Press
3
Press the LINE button for the second call. Then lift the base
handset or press K or h to answer or place the
second call.
4
To return to the first call, press
call on hold
— OR —
Replace the base handset in the cradle, or press K or
h
Then press the LINE button for the first call and lift the base
handset or press K or h .
Note: If you switch lines without placing the current call on hold,
you will drop the current call.

Conference Calls

You can use both lines at the same time to set up a three-party call.
1
Make or answer a call.
2
Press
3
Make a call on the other line.
4
When the call is answered, press
The conference call begins immediately.
5
To end a conference call, hang up. All parties will be
disconnected.
To drop one line:
1
Press
the line you wish to drop.
2 Press
To place a conference call on hold:
HOLD
Press to place both parties on hold. Lift the base handset or press
K or h to return to the conference call.
16
1/28/02 9:52 AM
HOLD
to place the first call on hold.
to end the current call.
HOLD
to place the call on hold.
DROP
. Then use
OK
. The selected line will be disconnected.
Page 16
HOLD
to place the current
CONF
.
and to select