AT&T 2462 User Manual page 40

2462_00_1 ATT CIB 1/28
ANSWERING SYSTEM OPERATION
Remote Access Commands
Function
End remote access call
Turn system off
Turn system on
Review announcement
Record announcement
Change Answer Mode
NOTE: The remote access call automatically ends if you don't press a
key within 15 seconds (other than when recording or playing messages
or announcements).
1/28/02 9:52 AM Page 37
AT TOUCH TONE PHONE
(continued)
Command:
Press * 0.
Press 0 and the mailbox number;
the system announces,"The ITAD is
now off. " Press 0 again to turn the
system back on.
When system is off, it answers after 10
rings and announces, "Please enter your
security code. " Press #, then
enter your four-digit security code.
Press 7, then the mailbox number.
The system plays the currently selected
announcement for the mailbox.
Press 8, then mailbox number.
After system prompt, record new
announcement for the currently selected
mailbox. Press 5 to stop. System plays
back announcement.
Press 9, then the mailbox number
the system announces current answer
mode (Answer + Record or Answer
Only) for the selected line. Press 9
again to change the answer mode.
37