Detach Canopy And Seat Pad; Cleaning And Maintenance; Warranty And Service - Nuna Pipa Instruction Manual

Canopy
1 Unzip the zipper behind the front canopy bow.
2 Pull the canopy out of the compartment.
3 Attach the magnets on each corner to the front of the car
(37)
seat.
Detach canopy
and seat pad
1 To disassemble the canopy, press the button in the canopy
mount and pull the canopy bow out.
2 Pull the fastening pieces underneath the edge of the seat
(39)
out.
3 Pull the harness out of the metal junction plate.
4 Remove the seat pad from the adjustment button as shown
(40)
in.
5 Remove the seat pad from the Stroller release button as
(41)
shown in.
Cleaning and
maintenance
After child is older than 6 months, please remove the foam
from the infant insert and store it somewhere your child
cannot access it.
29
(35)
(36)
(38)
(7)
Please wash the soft goods with cold water under 30°C.
Do not iron the soft goods.
Do not bleach or dry clean the soft goods.
Do not use undiluted neutral detergent, gasoline or other
organic solvent to wash the infant car seat and base. It may
cause damage to the product.
Use only mild detergent, water and a soft cloth to clean the
car seat shell, handle and harness straps and base.
Do not twist the soft goods to dry with great force. It may
leave the soft goods with wrinkles.
Please hang dry the soft goods in the shade.
Please remove the infant car seat and base from the vehicle
seat if not in use for a long period of time. Put the infant car
seat and base in a cool, dry place and somewhere your child
can not access it.
Warranty
and service
The Nuna car seat and base is covered by a one-year warranty.
If this product shows a defect during the warranty period,
please contact your retailer. If the retailer is unable to help you,
they will make contact with the local Nuna distributor.
Please be aware that the model number and serial number
located on the bottom of the base of the product will be
required in the event of a warranty claim.
30