R.V.R. Electronica TEX30LCD User Manual page 25

ELETTRONICA
5.4.5 Miscellaneous Menu (Mix)
This menu lets you set equipment address in an I
IIC
5.4.6 Version Menu (Vrs)
This screen holds equipment version/release information:
Note that these are readings, rather than settings, and cannot be edited (note the
empty arrow).
Rel
Dat
Tab
5.4.7 Channels Menu (L&R)
Right and left channel input levels are displayed as horizontal bars as shown in
the figure below.
The bar meter reflects the level corresponding to a 100% deviation for each channel
and provides a convenient reference when setting audio channel input levels.
L
R
User Manual
I C address setting. The I2C network address becomes significant when
2
the exciter is connected in an RVR transmission system that uses this
protocol. Do not change it unless strictly required.
Firmware release information.
Release date.
Shows table loaded in the memory.
Left channel Vmeter.
Right channel Vmeter..
Rev. 1.0 - 29/11/12
TEX30/50/100/150/300LCD
C bus serial connection:
2
Menu 8
Menu 9
Menù 10
21
/ 32