R.V.R. Electronica TEX30LCD User Manual page 24

TEX30/50/100/150/300LCD
5.4.3 Power Amplifier (P.A) Menu
This screen is made up of four lines that can be scrolled using the
buttons and shows the readings relating to final power stage:
Note that these are readings, rather than settings, and cannot be edited (note the
empty arrow).
VPA
IPA
Eff
Tmp
5.4.4 Setup Menu (Set)
This menu lets you view and set operating frequency.
F1
20
/ 32
Voltage supplied by amplifier module.
Current draw of amplifier module.
Efficiency based on ratio of forward power to amplifier module power,
in percent ( FWD PWR/(Vpa x Ipa) % ).
Equipment internal temperature reading.
Operating frequency setup. Set a new frequency value and then press the
ENTER button to confirm your selection; the exciter unlocks from current
frequency (the LOCK LED turns off) and will lock to the new operating
frequency (LOCK turns back on again).
If you press ESC or let the preset time time out, the previous frequency
setting is retained.
Rev. 1.0 - 29/11/12
Menu 6
Menu 7
ELETTRONICA
and
User Manual