R.V.R. Electronica TEX30LCD User Manual page 19

ELETTRONICA
1b) To modify power level setting, hold down the ENTER button until opening
the power setup menu.
The edit screen will look like this:
Next to SET indication, a bar provides a graphic display of preset output power.
The filled portion of the bar is proportional to set power level.
Example
100% potenza di uscita
25% potenza di uscita
The bottom line provides instantaneous power reading (300W for TEX300LCD
shown here), press button
you have achieved the desired level, press ENTER to confirm and exit the default
menu. Please note that the setting is stored automatically; in other words, if you
press ESC or do not press any keys before the preset time times out, the latest
power level set will be retained.
User Manual
TEX30/50/100/150/300LCD
Menu 1
Menu 2
Barra piena
1/4 della barra
to increase level, press
Rev. 1.0 - 29/11/12
≅ 300W in uscita
(mod.TEX300LCD)
≅ 150W in uscita
(mod.TEX150LCD)
≅ 100W in uscita
(mod.TEX100LCD)
≅ 50W in uscita
(mod.TEX50LCD)
≅ 30W in uscita
(mod.TEX30LCD)
≅ 75W in uscita
(mod.TEX300LCD)
≅ 700W in uscita
(mod.TEX702LCD)
≅ 37,5W in uscita
(mod.TEX150LCD)
≅ 25W in uscita
(mod.TEX100LCD)
≅ 12,5W in uscita
(mod.TEX50LCD)
≅ 7,5W in uscita
(mod.TEX30LCD)
to decrease it. When
15
/ 32