Projection Study Wizard Interface - Barco XHD-404 User Manual

Barco Media Server XHD-Series User Guide
6.2.2

Projection Study Wizard interface

Figure 6.3. Projection Study Wizard interface
Projector surface
Use these settings to simulate the physical surface that will be projected upon.
Type:
Size:
Luminance:
Surface Gain:
Pixel size:
122
This setting, Wall or Floor, defines the orientation of created project-
ors.
Size defines the pixel space (width and height for flat surfaces; radi-
us, height, and angle for curved surfaces) in m, cm, mm, ft, or inches.
Luminance of the projection surface.
This parameter should generally remain the default setting of 130
lux, unless projection is to take place in a bright environment, such
as outdoors during the day.
Surface gain is the extent to which the surface on which you are
projecting absorbs or reflects light. Values fall between 0.0 (100%
absorption) and 1.0 (100% reflection).
Pixel size defines the physical width of a projected pixel in milli-
meters.
Section 6: Tools
Barco Pn: 60600320