3: Connecting The Tv - Sony HT-SF470 Operating Instructions Manual

3: Connecting the TV

You can watch the selected input image when
you connect the HDMI OUT jack to a TV.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
Audio signal
A B
L
EZW-T100
R
AUDIO IN AUDIO IN
COAX IN
AUTO
VIDEO
CAL MIC SA-CD/CD TV
DC5V 0.7A MAX
HDMI
DVD IN BD IN
DMPORT
A Audio cord (not supplied)
B Optical digital cord (not supplied)
C HDMI cable (not supplied)
Sony recommends that you use an HDMI-
authorized cable or Sony HDMI cable.
* When you use Audio Return Channel (ARC)
function, the audio signal is output from the TV to
the receiver.
TV
Audio/video
signals
C
DIGITAL ANTENNA
AM
OPT IN OPT IN
SAT/CATV
TV
ARC
SAT/CATV IN TV OUT
l : Signal flow
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Connect To
A or B output the TV sound via the
speakers connected to the receiver.
Be sure to turn off the TV's volume
or activate the TV's muting
function.
C output the image to a TV while the
sound can be output from a TV
or/and speakers connected to the
receiver.
When the TV is compatible with
Audio Return Channel (ARC)
function, you can output the TV
sound via the speakers connected
to the receiver without connecting
A or B. For details, see
"Enjoying the TV sound via an
HDMI connection (Audio Return
Channel)" (page 45).
Be sure to turn off the TV's volume
or activate the TV's muting
function.
Notes
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
19 GB