Temperature Sensor - Draytek Vigor3900 User Manual

Path
Access Rights
Enable FTP
Port
Maximum Number of
Connections
Maximum Connection per
IP
4 . 1 4 . 3 T e m p e r
4 . 1 4 . 3 T e m p e r
A USB Thermometer is now available that complements your installed DrayTek router
installations that will help you monitor the server or data communications room environment
and notify you if the server room or data communications room is overheating.
During summer in particular, it is important to ensure that your server or data
communications equipment are not overheating due to cooling system failures.
The inclusion of a USB thermometer in compatible Vigor routers will continuously monitor
the temperature of its environment. When a pre-determined threshold is reached you will be
alerted by either an email or SMS so you can undertake appropriate action.
Vigor3900 Series User's Guide
a t u r e S e n s o r
a t u r e S e n s o r
It displays the directory name for the connected USB disk.
It displays the access right for the connected USB disk.
Check the box to enable FTP server.
Type required port number for FTP server. Or, use the
default value.
It means the maximum session limit for the FTP server.
The default setting is "4" for downloading, uploading and
keeping network connection.
It means the maximum session limit for the FTP server
per each IP address. For example, an IP address is used by
two FTP users for connecting network. That means there
are two sessions used for the IP and the FTP server.
The default setting is "10".
403