Menu Basics; Navigation Buttons; System Status; Main Menu - Rotel RSX-03 Owner's Manual

RSX-03 Surround Sound Receiver

Menu Basics

Navigation Buttons

The following remote control buttons are used
to navigate the OSD menu system:
MENU/OSD button: Press to display the
SYSTEM STATUS screen. From the SYSTEM
STATUS screen, press the ENTER button to
display the MAIN MENU screen which has
links to all other menus. If a menu is already
visible, push this button to cancel the display.
The MENU button on the front panel provides
the same function.
DOWN/UP Buttons: Press to move up and
down in the lists of menu items that appear
on the OSD screens.
+/– Buttons: Press to change the current
settings for a selected menu item on OSD
screens.
ENTER Button: From the SYSTEM STATUS
screen, press ENTER to display the MAIN
MENU screen. From any other OSD screen,
press ENTER to confirm a setting and return
to the MAIN menu.

System Status

����������������������
���������������
��������������������
�������������������
��������������������������
����������������������
���������������
�������
��������������������������
��������������������������
The SYSTEM STATUS menu provides a snap-
shot of the current system settings and a start-
ing point for reaching all other screens and
menus. This screen appears when you press
the remote MENU/OSD and displays the
following information:
LISTEN: the input source selected for lis-
tening.
VID INPUT: the video source selected for
viewing. Can be VIDEO 1–4 or OFF (no
video) as selected on the INPUT SETUP menu.
Typically, the video source matches the audio
from listening source; however a different
video input can be selected.
RECORD: the signal selected for record-
ing from the VIDEO OUT and TAPE OUT
outputs.
MODE: the current surround sound mode.
INPUT: the input selected for the current
source: Optical Digital, Coaxial Digital,
Analog, etc.
VOLUME: the current volume setting.
SPEAKERS: highlights the speakers that
are currently configured for the system (front
right, center, subwoofer, front left, surround
left, center back 1, center back 2, and sur-
round right)
No changes can be made using this screen;
it only provides information. To go to the rest
of the menus, press the ENTER button to go
to the MAIN menu. Press the MENU/OSD
button on the remote to cancel the display
and return to normal operation.
: The SYSTEM STATUS screen appears
NOTE
for five seconds when the unit is turned on
and automatically turns off.
32

Main Menu

�������������������
�
����������������������
���������������������������
�������������������
���������������������������
�
�������
The MAIN MENU provides access to OSD
screens for various configuration options.
MAIN MENU is reached by pressing the EN-
TER button from the SYSTEM STATUS menu
described above or from most other menus.
To go to the desired menu, move the high-
light using the UP/DOWN and +/– buttons
on the remote and press the ENTER button.
Press the MENU/OSD button on the remote
to cancel the display and return to normal
operation.
Configuring Inputs
A key step in setting up the RSX-03 is to config-
ure each source input using the INPUT SETUP
screens. Configuring the inputs allows you to
set defaults for a number of settings includ-
ing the type of input connector, the desired
surround mode, custom labels that appear in
the displays when a source is selected, and
many more. The following OSD menus are
used to configure the inputs.

Input Setup

��������������������
���������������
�����������������������������
���������������������
����������������������
����������������
���������������������������
������������
The INPUT SETUP menu configures the source
inputs and is reached from the MAIN menu.
The screen provides the following options, se-
lected by placing the highlight on the desired
line using the UP/DOWN buttons:
LISTEN: changes the current listening input
source (PHONO, CD, TUNER, TAPE, VIDEO
1–4, & MULTI INPUT). Changing this input
also allows you to select a specific input for
configuring.