Processor Fan And Heat-Sink Assembly; Removing The Processor Fan And Heat-Sink Assembly - Dell OptiPlex 3080 Tower Service Manual

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Processor fan and heat-sink assembly

Removing the processor fan and heat-sink assembly

Prerequisites
1. Follow the procedure in
WARNING: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to
cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
2. Remove the side cover.
3. Remove the fan duct.
36 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.