Usb Connection; Software Update - xDEEP BLACK EANX User Manual

USB CONNECTION

BlaCK eanX is equipped with a special four-contact UsB port situated on the
right side of the device. In order to connect the device to PC with UsB port,
use the charger plug and UsB cable supplied with the device.
after correct connection of UsB port, enable the UsB BlaCK eanX port by
function 'enable UsB' in the main menu. The BlaCK eanX should be displayed in
the system as 'mass storage Device'. after the files are copied, disconnect UsB
cable and the BlaCK eanX will automatically turn off UsB port.
Function 'enable UsB' is displayed only after correct connection
of the BlaCK eanX to PC or other device equipped with standard
UsB port.
some PC computers may fail to follow the compulsory electro-
magnetic emission standards and, therefore, may disturb the
operation of devices connected to them, leading to their hang-up.
To avoid potential problems, always connect first the adapter to
BlaCK eanX port and then connect it with UsB cable.
88

SOFTWARE UPDATE

The BlaCK eanX can be easily updated with latest software releases using the
UsB connection. To update the software:
http://support.xdeep.eu
1. register the device on
current firmware file that is unique for your device.
2. Connect the BlaCK eanX to UsB port in accordance with instructions from
the previous page and copy the received file to the device memory in 'firmware'
catalogue.
3. Disconnect the device from UsB port.
4. Turn on the BlaCK eanX and select from the menu Settings >> System >>
Restart
The device should automatically detect new software and start bootloader
mode. By pressing the right button you will start the new software. You can
check the number of the current software version installed in the device in
Settings >> System >> Information. If the device states the previous software
version, check whether you copied the correct file.
The update file is uniquely generated for each individual BlaCK
eanX device and cannot be used on any other device. Therefore,
if you have two devices, you will have to download software for
each of them individually.
and download the
89