Diving – ‘Deco Info’ Screen; Diving – ‘Additional Information’ Screen; Max. Depth - xDEEP BLACK EANX User Manual

DIVING – 'DECO INFO' SCREEN
The „Deco info" screen contains additional information related to diving, es-
sential in particular for technical divers during decompression dives or divers
using enriched air:
In the upper part of the screen there is the name of the active gas. Below
there is the following information:
• ppO2 – current oxygen partial pressure with bar graph. Vertical lines in the
diagram indicate in turn levels 1.4 and 1.6 aTa. exceeding the said levels results
in changing the diagram colour into a warning and then alarm colour.
• GF – current Gradient Factor in the form of percentage value and bar graph
where the edge of the screen indicates the value of 100%.
• CNS – current value of Cns% count. Vertical line in the bar graph indicates
recommended maximum value of Cns%, amounting to 80%.
• OTU – current value of OTU count.
• Surf. CNS – estimated value of Cns% count which is going to be reached after
ascending in compliance with currently calculated decompression.
28
DIVING – 'ADDITIONAL INFORMATION'
SCREEN
The 'additional information' screen provides information on current time, water
temperature and depth diagram (dive profile):
aVeraGe DePTH 7.6

maX. DePTH

35.2
The line colour of the dive profile also shows possible excess of optimal and
max. rates, according to VsI settings. Therefore, it is easy for you to identify
possible irregularities in dive profile (reversed, yo-yo profile, etc.), which may
require extending the decompression stops or increasing the surface interval
before the next dive.
CUrrenT TIme
18:30 16°C
waTer
Temp:
TemPeraTUre
DePTH DIaGram
(DIVe PrOFIle).
29